Frequently asked

12 to 24 pieces is the standard entry point for a toddler board; 48 pieces is the most common first 'real' jigsaw, and 100 pieces is the usual step after that.

Yes. UV print allows your artwork, a licensed image or a photo, and small runs can be printed to order. A new die line for a shaped puzzle is a one-off tooling cost.

Only where the piece size passes the small-parts test for that age band. We grade each jigsaw and state the age band on the product page; a 12-piece board with chunky pieces is the usual under-three format.

10 pieces per SKU for stock designs, 100 to 300 pieces for a custom print or a new shape.

The handle size. A peg is a small cylinder, usually under 10 mm across; a knob is a larger round grip, easier for a child under two. Chunky puzzles have no handle at all.

Knob puzzles from about 12 months, peg puzzles from about 18 months, chunky puzzles from about 2 years. The board should be graded on piece size, not on the picture.

Yes — printed on the board face, engraved on the back, or on the packaging. A name printed per unit is a made-to-order run, usually from 100 pieces.

Shrink-wrapped board with a colour header card, or a full colour box. Carton quantity and gross weight are on each product page.

Most classrooms introduce uppercase first because the shapes are more distinct, then move to lowercase. Stocking both in one board is a common compromise.

Yes. The board die stays the same; the print changes. Arabic, Cyrillic and accented Latin sets are all produced to order.

Paint is water-based and tested to EN71-3 migration limits. We supply the report per model with the quotation.

100 to 300 pieces depending on the number of colours and whether a new board size is needed.

The simpler layer puzzles suit 3 to 5; 3D and brain teasers are graded 5 to 8 and up. Each product page states the band and the small-parts status.

No. We make puzzles that come apart and go back together. Glue-together display models are a different category and we do not produce them.

The mechanism stays; the finish, the box and the solution card can carry your brand. A new mechanism is a development project, not a print change.

10 pieces per SKU for stock, 100 to 300 for custom packaging.

Simple four-shape boards from about 12 to 18 months; nine-shape and layered boards from about 2 years. Piece size decides the grade.

For the under-three bands, yes — the pieces are graded to pass the small-parts cylinder. The age band on each product page reflects that.

Yes. Shape sets can follow a curriculum, a language or a theme, and the board can carry a printed name or logo.

10 pieces per SKU for stock, 100 to 300 for a custom board or box.

A tangram is exactly seven pieces that form a square; pattern blocks are a larger set of geometric shapes used for tessellation and design. Both are in this range.

The classic proportion is used across the range so pieces from different sets are interchangeable within a size family.

Yes. Card decks are printed to your artwork from 300 sets; the wooden pieces can be branded by laser or print.

10 pieces per SKU for stock sets, 100 to 300 for custom cards or packaging.

Simple pair matching from about 2 years; a memory game with hidden pieces and turn-taking from about 4. The product page states the band.

The two-piece sets are. A wrong pair will not fit together, which lets a child work without an adult.

Yes — printed faces are the easiest customisation in the whole catalogue. Themes, languages and school-specific sets are all produced to order.

10 pieces per SKU for stock, 100 to 300 for custom print or packaging.

They follow the common early-years sequence of numeral recognition, counting to 10 and 20, and simple fractions. We can print a specific sequence to order.

Yes — combination boards are in the range, and a custom layout is a print change rather than new tooling.

Where the piece is large enough to pass the small-parts test for that band. The age band on each product page reflects the test.

10 pieces per SKU for stock, 100 to 300 for custom print or packaging.

A factory. Cutting, sanding, printing, assembly and packing are done in our own workshop in Yunhe County, Zhejiang.

10 pieces per SKU for stock products. A custom print, colour or box usually starts at 100–300 pieces.

Yes — printed or engraved on the product, and on the packaging, barcode and manual. Most of the range can be customised without new tooling.

About 15–35 days after sample approval, plus transit from Ningbo or Shanghai.

Yes, per model: EN71 for the EU, ASTM F963 and CPSIA for the US, with CE marking where applicable.

Yes. Most buyers mix 8–15 SKUs; we build a loading plan before production starts.